These lists are made up of both weaves I have personally done, or have on my To Do List. This means that some of these figures are based on experience, and others on theory and found sizes. The ring sizes in the Tested column show those sizes that have been tried and found to work. The material used has also been listed. The ring sizes listed in the Ideal Ring ID column are based on calculations and are therefore provided as a guide only to help you with your mailling.

They are a work in progress and will be updated and/or changed as time and experience permits.

Gauge Measurements used:

0.8mm (0.032″) = 20AWG = 21SWG
1.0mm (0.04″) = 18AWG = 19SWG
1.2mm (0.018") = 16AWG (BaseMetals) = 18SWG
1.29mm (0.051″) = 16AWG (Precious Metals)
1.6mm (0.064″) = 14AWG = 16SWG

* Ideal AR figure is based on data from the MailleArtisans site.

Alu=Aluminium (Bright & Anodised), Brnz=Bronze, Cu=Coppper, JB=Jewellery Brass, SSilver=Sterling Silver, AGS=Argentium Silver, GF=Gold Filled (Yellow & Rose), SF=Silver Filled, Nio=Niobium, Tit=Titanium, SStl=Stainless Steel

Weaves – N Weaves – P Weaves – R Weaves – S Weaves – T Weaves – V

N

Name	Ideal AR*	Gauge	Ideal RingID
Not Tao 3	4.0 5.0	0.8mm	3.25mm 4.00mm
		1.0mm	4.00mm 5.00mm
		1.2mm	4.75mm 6.00mm
		1.29mm	5.25mm 6.50mm
		1.6mm	6.50mm 8.25mm
Not Tao Linear	4.0 6.4	0.8mm	3.25mm 5.25mm
		1.0mm	4.00mm 6.50mm
		1.0mm	4.75mm 8.00mm
		1.29mm	5.25mm 8.25mm
		1.6mm	6.50mm 10.50mm

N

Name	Ideal AR*	Gauge	Ideal RingID	Ring Count
Persian (full)	5.5	0.8mm	4.50mm	25rpi
		1.0mm	5.50mm	24rpi
		1.2mm	6.50mm
		1.29mm	7.00mm	16rpi
		1.6mm	9.00mm	13rpi
Persian (half 3in1)	4.3	0.8mm	3.50mm
		1.0mm	4.50mm
		1.0mm	5.25mm
		1.29	5.50mm
		1.6mm	7.00mm
Persian (half 4in1)	5.1	0.8mm	4.25mm	20rpi
		1.0mm	5.25mm	16rpi
		1.2mm	6.00mm
		1.29mm	6.50mm	13rpi
		1.6mm	8.25mm	11rpi

R

Name	Ideal AR*	Gauge	Ideal RingID	Ring Count
Rhino Snorting Drano	3.3	0.8mm	2.75mm
		1.0mm	3.50mm
		1.2mm	4.00mm
		1.29mm	4.25mm
		1.6mm	5.25mm
Rondo	3.7 4.5 6.9	0.8mm	3.00mm 3.75mm 5.50mm
		1.0mm	3.75mm 4.50mm 7.00mm
		1.2mm	4.50mm 5.50mm 8.25mm
		1.29mm	4.75mm 5.75mm 9.00mm
		1.6mm	6.00mm 7.25mm 11.25mm
Rosetta	3.5	0.8mm	2.75mm
		1.0mm	3.50mm	32rpi
		1.2mm	4.25mm
		1.29mm	4.50mm	24rpi
		1.6mm	5.75mm

S

Name	Ideal AR*	Gauge	Ideal RingID
Scherzo	5.0 5.3	0.8mm	4.00mm 4.25mm
		1.0mm	5.00mm 5.50mm
		1.2mm	6.00mm 6.50mm
		1.29mm	6.50mm 6.75mm
		1.6mm	8.25mm 8.75mm
Shenanigans	3.0 4.0	0.8mm	2.50mm 3.25mm
		1.0mm	3.00mm 4.00mm
		1.0mm	3.50mm 4.75mm
		1.29mm	3.75mm 5.25mm
		1.6mm	5.00mm 6.50mm
Spiral 4in1	4.0	0.8mm	3.25mm
		1.0mm	4.00mm
		1.2mm	4.75mm
		1.29mm	5.25mm
		1.6mm	6.50mm
Spiral 6in1 (Double Spiral)	5.5	0.8mm	4.50mm
		1.0mm	5.75mm
		1.2mm	6.50mm
		1.29mm	7.00mm
		1.6mm	9.00mm
Sweet Pea	4.2	0.8mm	3.50mm
		1.0mm	4.25mm
		1.2mm	5.00mm
		1.29mm	5.50mm
		1.6mm	6.75mm

T

Name	Ideal AR*	Gauge	Ideal RingID	Tested RingID
Trees	4.3	0.8mm	3.50mm
		1.0mm	4.50mm
		1.2mm	5.25mm
		1.29	5.50mm
		1.6mm	7.00mm
Trizantine	5.2	0.8mm	4.25mm
		1.0mm	5.25mm
		1.2mm	6.25mm
		1.29mm	6.75mm
		1.6mm	8.50mm
Turkish Round	3.3	0.8mm	2.75mm	7/64"
		1.0mm	3.50mm	9/64"
		1.2mm	4.00mm	5/32"
		1.29mm	4.25mm
		1.6mm	5.25mm
Turtle Back	2.9	0.8mm	2.25mm
		1.0mm	3.00mm
		1.2mm	3.50mm
		1.29mm	3.75mm
		1.6mm	4.75mm

V

Name	Ideal AR*	Gauge	Ideal RingID
Vipera Berus	3.3	0.8mm	2.75mm
		1.0mm	3.50mm
		1.2mm	4.00mm
		1.29mm	4.25mm
		1.6mm	5.25mm
Viperscale	6.0	0.8mm	5.00mm
		1.0mm	6.00mm
		1.2mm	7.25mm
		1.29mm	7.75mm
		1.6mm	9.75mm

Weaves M-Z

N

N

R

S

T

V